Call Us: +91- 11 - 2794 1245
PRODUCTS
Nabertherm (Laboratory)

  Annealing, Hardening and Brazing Furnaces N 7/H - N 61/H

N 7/H - N 61/H

To withstand harsh use in the laboratory, e.g. when heat-treating metals, robust insulation with light refractory bricks is necessary. The N 7/H - N 61/H models are a perfect fit to solve this problem. The furnaces can be extended with a variety of accessories, like annealing boxes for operation under protective gas, roller guides, or a cooling station with a quenching bath. Even high-performance applications like the annealing of titanium in medical applications can be implemented without the use of expensive and complicated annealing systems.

More Info >>

  Assay Furnace N 110/HS and S 73/HS

N 110/HS

The N 110/HS furnace is especially used for the assay of precious metals where the insulation and heating must be protected from emerging gasses and vapours. The furnace chamber forms a ceramic muffle which can easily be replaced. In the standard design, the muffle is closed with a firebrick plug. A lift door can be installed instead upon request.

More Info >>

  Chamber Retort Furnaces up to 1100 °C

NRA 12/06 - NRA 430 /11

These gastight retort furnaces are equipped with direct or indirect heating depending on temperature. They are perfectly suited for various heat treatment processes requiring a defined protective or a reaction gas atmosphere

More Info >>

  Compact Tube Furnaces R

R 50/250/12 - R 120/1000/13

These compact tabletop tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fibre plugs, these furnaces have an unbeatable price/performance ratio.

More Info >>

  Fast-Firing Kilns LS 12/13 and LS 25/13

LS 12/13 and LS 25/13

These models are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300 °C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold of under 35 minutes.

More Info >>

  Gradient Kilns GR 1300/13

GR 1300/13

The kiln chamber is divided into six equal control sections over its heated length of 1300 mm. Each of these zones is individually controlled. For temperatures up to 1300 °C a gradient of up to 400 °C can be achieved.

More Info >>

  High-Temperature Furnaces with SiC Rod Heating HTC 01/14 - HTCT 0

HTC 01/14 - HTCT 08/16

These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, or 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory.

More Info >>

  Melting Furnaces K 1/10 - K 4/13, KC Models

K 1/10 - K 4/13, KC 1/15 + KC 2/15

These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not for KC) on the front of the furnace make exact dosing easy when pouring the melt. The furnaces are available for furnace chamber temperatures of 1000, 1300, or 1500 °C. This corresponds to melt temperatures of about 80-110 °C lower.

More Info >>

  Muffle/Preheating/Ashing Furnaces and Accessories

L 3/11 - LT 40/12

Our L 3/11 - LT 40/12 series is the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The furnaces come equipped with either a flap door or lift door at no extra charge

More Info >>

  Ovens TR 60 - TR 1050 up to 300 °C

TR 60 - TR 1050

With their maximum working temperature of 300 °C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilizing or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.

More Info >>

  Professional Chamber Furnaces with Brick Insulation LH or Fibre I

LH 15/12 - LF 120/14

The LH 15/12 - LF 120/14 laboratory furnaces have been trusted for many years as professional chamber furnaces for the laboratory. These furnaces are available with either a robust insulation of light refractory bricks (LH models) or with a combination insulation of refractory bricks in the corners and low heat storage, quickly cooling fibre material (LF models). With a wide variety of optional equipment, these models can be optimally adapted to your processes.

More Info >>

Customers
 
Products
 
Copyright © 2010. Innova Lab-Instruments Pvt. Ltd. | Privacy policy Powered by: Microsys Infomedia Pvt. Ltd.